Introducing a New Generation of Grades for Hard Materials and High Temperature Alloys
Vargus is proud to launch the VI8 and VI10, two new thread turning grades that have been engineered to machine a distinct range of materials.
VI8 and VI10 extend the MACH platform with grades matched precisely to their target material groups, dedicated performance where it matters most.
• MACH inserts IC3/8" and IC1/2", external and internal.
• Additional geometries and profiles available upon request.
PVD TiAlSiN coating and geometry, specifically designed for extremely hard materials up to 62 HRC and high-temperature alloys.
• Up to 62 HRC
• ldeal for interrupted cuts
• PVD TiAlSiN coating
• Negative rake angle
PVD TiAlSiN coating and geometry, specifically designed for low-carbon steel and Titanium alloys.
• Sharp edge preparation
• Cutting edge surface treatment
• PVD TiAlSiN coating
• Neutral rake angle
Increase Versatility & Productivity
The MACH TT system was designed for complete versatility.
It works best with a dedicated MACH TT holder, but at the same time MACH TT inserts can be placed in ANY standard insert pocket, still providing great performance.
Material: SAE 4340 Steel 55 HRC
Insert: 3DTER1.5ISOVI8
Cutting Data:
Vc [m/min]: 40
No. of Passes: 8
Type of Pass: Modified Volume Chip
Material: Titanium Grade 5
Insert: 3DTER1.5ISOETVI10
Cutting Data:
Vc [m/min]: 80
No. of Passes: 7
Type of Pass: Modified Volume Chip
